Copper by decade
5 min read
On this page
Copper is in about four BC strata plumbing records in five, in buildings from every decade. What changes with the build year is not the metal but its condition, its leak rate and the year the engineers expect to replace it.
Ask what is inside the walls of a BC strata and the answer is usually copper. Risers, mains, hot-water loops and, in older buildings, the branch lines into every suite. Unlike Poly-B, copper has no birth certificate: it went into buildings from the 1960s to today. So the useful question is not whether a building has it but how old it is and how it is holding up. We took every BC plumbing record that names a pipe material, built from depreciation reports, engineering reports, insurance applications and minutes, and sorted it by the decade the building went up.
4 in 5 | ~70% | ~35 yrs |
|---|---|---|
BC plumbing records that list copper | pre-1970 BC copper rated aging or worse | median build-to-planned-renewal span, BC copper |
Copper in every decade, PEX after 2000
| Category | Copper | PEX |
|---|---|---|
| Before 1970 | 93% | 37% |
| 1970s | 88% | 23% |
| 1980s | 83% | 27% |
| 1990s | 82% | 26% |
| 2000s | 87% | 52% |
| 2010 or later | 63% | 56% |
Across BC, about 79% of plumbing records that name a material list copper, about 38% list PEX and about 20% list cast iron, which shows up in drain and vent stacks rather than supply lines. About 31% list copper and PEX together, the common pairing of copper risers feeding plastic branch lines in the suites.
By build decade, copper barely moves. About 93% of records for BC stratas built before 1970 list it, about 88% for the 1970s, about 83% for the 1980s, about 82% for the 1990s and about 87% for the 2000s. Only in buildings completed in 2010 or later does it drop, to about 63%. PEX is the mirror image: about one record in four for buildings from the 1970s to the 1990s, then about 52% for the 2000s and about 56% since 2010.
The oldest stock is the exception that proves the rule. About 37% of pre-1970 records list PEX, more than any decade until 2000, which points to repiping rather than original pipe. Cast iron follows age the other way: about 41% of pre-1970 records name it, about 27% for the 1970s and around 17% to 20% for every decade since.
Same metal, different age
| Category | Rated aging or worse |
|---|---|
| Before 1970 | 70% |
| 1970s | 56% |
| 1980s | 53% |
| 1990s | 56% |
| 2000s | 36% |
| 2010 or later | 18% |
Condition tracks the calendar, but not in a straight line. About 70% of BC copper records for buildings from before 1970 are rated aging or worse. For the three decades from 1970 to 1999 the share sits on a plateau, between about 53% and 56%. Then it falls: about 36% for the 2000s and about 18% since 2010.
The leak record in the minutes has the same shape. Per 100 units a year, the median BC copper building from before 1970 logs about 1.7 plumbing leaks, the 1970s about 1.7, the 1980s about 1.8 and the 1990s about 1.5. Buildings from the 2000s log about 0.9 and those from 2010 or later about 0.6. Almost all of them record at least one: between about 83% and 90% in every decade.
A BC copper building from the 1970s and one from the 1990s look much the same on paper. The line moves at 2000.
Corrosion does not follow age as neatly. About half of BC copper records in every decade carry a corrosion flag, from about 45% for buildings since 2010 to about 65% before 1970. Metro Vancouver's water is naturally soft and slightly acidic, which speeds copper corrosion, and the region raised its drinking-water pH in 2021 to slow it down. [1] About one BC copper record in eleven names pinhole leaks outright, and about one plumbing leak in thirty in the minutes of copper buildings is described as a pinhole.
Why the hot loop goes first
The catalogue of failures has a favourite spot. BC copper records that mention the hot-water recirculation line flag corrosion about 64% of the time, against about 48% for the rest, and name pinholes about twice as often, about 16% against 8%. Recirculating hot water moves through the pipe all day, and plumbing engineers have long linked fast, hot, constantly moving water to erosion corrosion in copper, with design guidance that keeps flow velocities low. [2] That is why a strata's first plumbing project is often the recirculation loop rather than a full repipe.
When the engineers expect to replace it
Where a BC copper record gives a planned replacement year and no renewal is underway, the median is 2035, with the middle half between 2029 and 2041. By build decade the median is about 2029 for 1970s buildings, 2032 for the 1980s, 2031 for the 1990s, 2036 for the 2000s and 2042 for buildings since 2010. Measured from the build year, that is about 35 years at the median, with the middle half between about 30 and 47 years.
Depreciation reports in BC look 30 years ahead and give each component an estimated service life, so domestic water piping is one of the lines they usually carry. [3] When the work comes, it is often paid for by a levy. The median approved BC piping or repipe levy, of any material, is about $250,000 for the building and about $2,700 per unit, with the middle half between about $550 and $7,600 a door.
What to do with this
If you are buying: find the domestic water piping line in the depreciation report and note its planned year. In a building from the 1970s to the 1990s, read the minutes for "pinhole", "recirculation" and "riser".
If you own a unit: ask where the strata's piping ends and yours begins under the bylaws, since branch lines inside a strata lot can be the owner's to repair. [4]
If you are on council: this is the base rate. A copper system planned for renewal about 35 years after the building went up is in the middle of the BC range.
How we counted. Based on 2,000+ samples drawn from our pool of BC strata reviews. Figures come from the plumbing records and the council and general-meeting minutes in those samples, mostly 2023 to 2026. Shares are of BC stratas whose plumbing record names at least one pipe material; a record counts as copper, PEX or cast iron when that material appears in its list. Build decade is the corporation's first section. Leak rates divide plumbing and burst-pipe incidents in the minutes by unit count and by the years of minutes read. Planned replacement years leave out systems already being replaced. Levies are approved piping and repipe levies of any material. Figures are medians, middle half (p25 to p75) or shares, rounded. No building is identified. If you use these figures, a link back to this post is appreciated.
Further reading
Frequently asked questions
How common is copper plumbing in BC stratas?
About 79% of BC strata plumbing records that name a pipe material list copper. It is between about 82% and 93% for every build decade before 2010, and about 63% for buildings since 2010.
How long does copper pipe last in a BC strata?
Where a BC plumbing record gives a planned replacement year for copper, the median is about 35 years after the building went up, with the middle half between about 30 and 47 years.
Do older copper buildings leak more?
Up to a point. BC copper buildings from before 2000 log about 1.5 to 1.8 plumbing leaks per 100 units a year at the median. Buildings from the 2000s log about 0.9 and those from 2010 or later about 0.6.
What does a repipe cost in a BC strata?
The median approved BC piping or repipe levy is about $250,000 for the building, or about $2,700 per unit, with the middle half between about $550 and $7,600 a door.
What happened in a building, and whether it is normal
StrataReports reads the full document package of one strata or condo building and reports what happened in it. It then compares the whole building with similar buildings nearby, from finances and insurance to repairs, the condition of its components and disputes, and shows what is normal and what is not. Every finding links to its source page.